STRUCTURAL &
GEOTECHNICAL
ENGINEERING
COSMO TECHNOLOGICAL CONSULATANT CO.,LTD.
OUR SERVICE
- OUR SERVICES -
BUILDING TEST
Investigation structural strength
BACK TO OVERVIEW
To evaluate the existing conditions of the building in terms of their capacity, durability and to identify significant that may cause the building failure.
BUILDING LIFTING
FOUNDATION STRENGTHENING
BACK TO OVERVIEW
This service provides the structural solution especially for building which has problem of crack come fromthe unstable foundation.
SPUN PILE STEEL PILE
MICRO PILE
BACK TO OVERVIEW
The micro pile such as steel pile and concrete spun pile is used for small and limited space. It can also used for renovated the building.
Steel pile dia. 0.10-0.25 M.
Spun pile area 0.20-0.25 M.
DYNAMIC LOAD TEST
PILE TEST
BACK TO OVERVIEW
Dynamic pile load test is a method to assess a pile's bearing capacity by applying a dynamic load to the pile head while recording acceleration and strain on the pile head.
SEISMIC TEST
PILE TESTING
BACK TO OVERVIEW
Pile integrity test (PIT) as "low strain impact integrity testing of deep foundation is a widely used non-destructive test method for the evaluation of pile quality, integrity and to help estimate the unknow length of existing piles and foundation
Seismic pile test.
Parallel seismic pile test.
STATIC LOAD TEST
PILE TEST
BACK TO OVERVIEW
Static pile load test is a type of load testing used in geotechnical investigation to determine the bearing capacity of deep foundations prior to the construction of a building. It differs from the statnamic load test and dynamic load testing in that the pressure applied to the pile is slower.
SOIL BORING TEST
SOIL TEST
BACK TO OVERVIEW
Soil boring test used to survey soil condition and soil profile. The method is taking several shallow cores out of the sediment.
Soil boring test provide ability of soil to support structures on the surface that related to pile, footing.
FIELD DENSITY TEST
SOIL TEST
BACK TO OVERVIEW
Therefore field density test is importance as a field control test for the compaction of soil or any other pavement layer. The basic principle of sand replacement method is to measure the in-situ volume of hole from which the material was excavated from the weight of sand with known density filling in the hole.
DESIGN & CONSTRUCTION
By architect and engineer
BACK TO OVERVIEW
We have provided a design and construction service espacially warehouse, factory, low-rise building. We have an experience in design and construction for 10 year.
INTRO
OUR SERVICES
ABOUT US
CONTACT
Building Inspection Structure assessmentMicro Pile Spun pile | Steel pileUnderpinning By micropileSeismic test Pile integrityDynamic test Pile testStatic load test Pile testSoil boring test Soil analysisPlate bearing test Ultimate bearing capacityDesign and Construction Warehouse | Factory